Where is the drum unit on a Brother printer?
For Brother printers, the drum unit is usually connected to the toner cartridge. 1. To find it, simply open the front flap of your laser printer and find the toner cartridge(s) which the drum unit will be attached to or beneath.27 мая 2014 г.
How do you fix a drum on a Brother printer?
When you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps:
- Make sure the machine is turned on.
- Open the front cover.
- Press and hold OK for about two seconds to display Drum Unit, and then press OK.
- Press the Up arrow key to reset the drum counter.
Why do I need to replace the drum in my Brother printer?
The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
How long does a brother drum unit last?
approximately 15,000 pages
What happens if you don’t replace printer drum?
Many consumers have the “If it ain’t broke, don’t fix it” mentality. But the replacement of a drum unit is vital to laser printers’ health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner.
How do I reset the drum end on my Brother printer?
DO NOT reset the drum counter unless you are replacing the drum unit.
- Close the front cover.
- Make sure the machine is turned on.
- Press. (Settings). …
- Press All Settings. …
- Choose Machine Info. or Machine Information => Parts Life.
- Press and hold Drum or Drum Life until the machine’s display message changes.
- Press Yes.
How do I clean the drum on my Brother printer?
Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
How do I know if my printer drum is bad?
The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.
Is a printer drum the same as toner?
The two most important components of a laser printer are the toner cartridge and the drum unit which is where the question of drum units vs. toner cartridges comes in. … So, the toner cartridge is the container that holds toner particles while the drum unit is the component that holds the image that needs to be printed.
Do you need to replace drum on laser printer?
Most printers use toner cartridges with the drum unit built into the cartridge. If you own an HP laser printer, for example, the drum unit is likely incorporated into the toner. Therefore, there is no need to replace the drum separately.
Can you clean a printer drum?
After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.
How do you check the drum life on a Brother printer?
Can I check the remaining life of my Brother machine’s drum?
- Press MENU and choose Machine Info. => Drum Life.
- Press the OK key. Your Brother machine’s LCD will display the percentage of remaining drum life.
- Press the STOP/EXIT key.
How long should a Brother printer last?
around 3-5 years
What does it mean when my Brother printer says Drum End Soon?
The message Drum End Soon indicates the drum unit will need to be replaced soon. You can replace the drum unit when you feel the print quality is no longer acceptable or when the message Replace Drum is displayed. …