How do you reset the drum on a Brother printer?
FAQs & Troubleshooting
- Close the front cover.
- Make sure the machine is turned on.
- Press. (Settings). …
- Press All Settings. (This step might be skipped in some models.)
- Choose Machine Info. or Machine Information => Parts Life.
- Press and hold Drum or Drum Life until the machine’s display message changes.
- Press Yes.
What does it mean to replace drum on Brother printer?
The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
How long does a Brother printer drum last?
approximately 15,000 pages
How do I know if my printer drum needs replacing?
Separate drum units last quite a bit longer than a toner cartridge and typically should be replaced after the use of 3-4 toners. Your printer should inform you when it’s time to replace the drum, but you can usually tell your drum is on it’s last legs if you start to see black spots or lines across the page.
What happens if I don’t replace printer drum?
Many consumers have the “If it ain’t broke, don’t fix it” mentality. But the replacement of a drum unit is vital to laser printers’ health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner.
How do I clean the drum on my Brother printer?
Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
Is a printer drum the same as toner?
The two most important components of a laser printer are the toner cartridge and the drum unit which is where the question of drum units vs. toner cartridges comes in. … So, the toner cartridge is the container that holds toner particles while the drum unit is the component that holds the image that needs to be printed.
How do I know if my laser printer drum is bad?
The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.
How do you check the drum life on a Brother printer?
Can I check the remaining life of my Brother machine’s drum?
- Press MENU and choose Machine Info. => Drum Life.
- Press the OK key. Your Brother machine’s LCD will display the percentage of remaining drum life.
- Press the STOP/EXIT key.
How often does a printer drum need to be replaced?
10,000 to 50,000
Can you clean a printer drum?
After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.
How do you fix a printer drum?
Make sure that the printer is on and open the front cover. Remove the toner cartridge and drum unit from the machine.
Once the new drum is replaced, you will need to reset the drum counter:
- Open the front cover.
- Press and hold OK for 2 seconds.
- Press the Up arrow key or 1 to reset the drum counter.
What is a printer drum brother?
What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.