Help

Why does my printer not recognize my ink cartridge?

How do I fix my Canon ink cartridge is not recognized?

If the printer still does not recognize the cartridge, try taking out the unrecognized cartridge, turn off the power on the printer and unplug the printer for about 30 to 60 seconds. Plug and power the printer back on and reinstall the cartridge and print.

Is there a reset button on ink cartridges?

Resetting the Printer Cartridges

On some models, there is a reset button located above the contacts in the center. … After resetting each cartridge, you can then replace them and the printer should accept them as if they were new.

Why does my HP printer says Cartridge error?

Sometimes Error message on your HP Printer will prevent you from printing until you fix that error. If you see an error message on your printer saying that you have an incorrect ink cartridge or a flashing cartridge light its means a bad color cartridge or you are told to remove that color cartridge.

Where is the reset button on a Canon printer?

Turn on your printer and go to the menu. Access the directional arrows to perform in the setup menu. Go to the Device settings and then press OK. Choose the Reset settings option and then press OK to start the process.

How do you reset a Canon ink cartridge?

Next, reset the cartridge ink counter:

  1. Unplug the power and the USB cables from the printer.
  2. Open the cartridge door and hold down the power button.
  3. Reconnect the power cables while still holding down the power button.
  4. Close the cartridge door and release the power button. The ink cartridge is now reset.
You might be interested:  What is wpa wep on wireless printer

How do I bypass the ink cartridge on my Canon printer?

To do this, please press and hold down the STOP/RESET or RESUME/CANCEL button on the printer for at least 7 seconds, then release it. You will need to do this for each ink cartridge that is low or out of ink.

How can I trick my HP ink cartridge?

How to Fool an HP Deskjet Into Thinking it Has New Ink Cartridges

  1. Remove the ink cartridge from the printer carriage. Turn the cartridge over so that you are looking at the copper contacts. …
  2. Place a small piece of clear tape over the seventh copper contact in the second row of contacts from the left side. Place the cartridge back in the printer. …
  3. Keep that piece of tape on the contact.

Why is my printer not working after replacing ink cartridges?

Verify the ink cartridge(s) has been inserted properly. If a lever has been changed from its original position to allow the installation of ink cartridges, ensure it has been returned to its original position. Perform a head cleaning on printer if available. Try resetting the ink cartridge counter.

How do I reset the ink on my HP printer?

How to Reset Ink Levels on an HP Cartridge

  1. Locate and take out both the black and the color ink HP cartridges from your printer.
  2. Press the “On” button on your printer to turn it on, wait 20 seconds, then turn it off. Allow the printer to completely turn off. …
  3. Replace the black and the color HP cartridges inside the printer.
You might be interested:  How to install lexmark printer

How do I clear an error on my HP printer?

To temporarily clear the error, reset the printer.

  1. With the printer turned on, disconnect the power cord from the printer.
  2. Unplug the power cord from the power source.
  3. Wait 60 seconds.
  4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.

Leave a Reply

Your email address will not be published. Required fields are marked *