How to reset drum life on brother printer

Why does my Brother printer keep saying replace drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you reset the drum counter on a Brother HL 4570cdw?

Brother HL-4570CDW – Reset Drum

  1. Press the “+” key to find “Machine Info”.
  2. Press “OK”.
  3. Press the “+” key to find “Reset Parts Life”.
  4. Press “OK”.
  5. Press the “+” key to find “Drum Unit”.
  6. Press “OK”.
  7. Press the “+” key to reset the drum counter. Archive.

How do you fix a Brother printer drum?

Make sure that the printer is on and open the front cover. Remove the toner cartridge and drum unit from the machine.

Once the new drum is replaced, you will need to reset the drum counter:

  1. Open the front cover.
  2. Press and hold OK for 2 seconds.
  3. Press the Up arrow key or 1 to reset the drum counter.

What happens if you don’t replace printer drum?

The drum then picks up toner in the areas where it is charged and transfers it to the paper. An electrical charge in the printer then resets the drum’s charge so that it can print again. Over time, the drum’s chemicals can lose their effectiveness and the drum’s surface can be damaged.

How do you fix a drum error?

Drum Error (Drum!)

You might be interested:  How to add a wifi printer on mac

Clean the corona wires in the drum unit. Click here to see how to clean the corona wires. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly.

How do you reset the belt on a Brother printer?

Reset the Belt Unit Counter

  1. Make sure the machine is turned on.
  2. Press. (Settings). If your machine displays the All Settings menu on the Home screen, skip this step.
  3. Press All Settings => Machine Information or Machine Info. => Parts Life.
  4. Press and hold Belt until the machine’s display message changes.
  5. Press Yes.
  6. Press. (Home).

How do you replace the drum on a Brother MFC l8850cdw?

Replacing the drum unit

Press the front cover release button and then open the front cover. Hold the blue handle of the drum unit. Pull the drum unit out until it stops. Turn the blue lock lever (1) at the left of the machine counterclockwise to the release position.

How do I clean the drum on my Brother printer?

Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.

How do I know if my printer drum is bad?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

Leave a Reply

Your email address will not be published. Required fields are marked *