How do I change my Canon toner cartridge?
Replacing the Toner Cartridge
- Hold the operation panel.
- Lift the scanning platform.
- Hold the grip on the left front side of the toner cover.
- Open the toner cover.
- Remove the toner cartridge.
- Gently shake the toner cartridge five or six times to evenly distribute the toner inside the cartridge.
11 мая 2015 г.
How do I get more toner out of my cartridge?
Most toner cartridges have a small sensor hole on the non-gear side of the cartridge, covering this up with a small piece of electrical tape might bring your printer back to life. If the initial forum posts are any indication, you might even get a solid 400-500 extra pages.
When should I replace my toner cartridge?
The most obvious sign of low toner cartridge is poor print quality. Streaking, lines or missed prints are all possible signs that cartridge replacement is imminent. If you have tried rocking the toner cartridge and are still getting poor prints, it is likely time to replace your cartridge.
How do I change my printer toner?
To replace the toner cartridge, open the scanner assembly and top cover, remove the old toner cartridge, and then install a new one.
- Lift the scanner assembly. …
- Open the top cover. …
- Remove the toner cartridge. …
- Remove the new toner cartridge from the package. …
- Place the used toner cartridge in the bag for recycling.
How do I install Brother toner cartridge?
Replace the Toner Cartridge
- Make sure the machine is turned on.
- Open the front cover.
- Remove the toner cartridge and drum unit assembly from the machine.
- Push down the green lock lever and take the toner cartridge out of the drum unit.
- Unpack the new toner cartridge.
- Remove the protective cover.
Does shaking the toner cartridge help?
You never want to shake the toner bottle. Although shaking the toner bottle isn’t any less safe to your health than shaking a home or small office toner cartridge, if your printer runs out of toner because you tried extending the life of your bottle, your developer could break.
How do I fix a leak in my toner cartridge?
How To Clean Toner When It’s Leaking (Or After It Was Leaking)
- Yuck! …
- Place a piece of paper towel beneath your printer’s cover panel to catch the loose toner and open the front cover.
- Remove the leaky toner cartridge.
- Hold it as level as possible to avoid any more spillage.
- Toss it in the trash.
How do I reset my Canon Pixma ink cartridge?
Next, reset the cartridge ink counter:
- Unplug the power and the USB cables from the printer.
- Open the cartridge door and hold down the power button.
- Reconnect the power cables while still holding down the power button.
- Close the cartridge door and release the power button. The ink cartridge is now reset.
Where is the cartridge in a Canon printer?
In most cases, you can access the printer’s ink cartridges by placing your hand under the top panel of the printer and lifting up. If your printer has a built-in scanner, locate and lower the plastic arm on the underside of the scanner bed to lock the panel in place.
How do I know if my toner cartridge is used?
Re: How can I tell if a copier toner cartridge is new or used? If it is new and unused then it should have a tear out strip of plastic that unseals the toner compartment. If that’s not there, then it’s highly likely to have been used.
What does it mean when printer is low on toner?
A Cartridge is Low or Cartridge is Very Low message displays when the amount of toner in the cartridge is below a certain percentage. This message is a reminder to have a replacement toner cartridge available. You do not need to replace the toner cartridge until print quality becomes unacceptable.