Help

How to fix drum error on brother printer

How do you reset the drum on a Brother printer?

FAQs & Troubleshooting

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings). …
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

Why does my Brother printer says Drum error?

The message “Drum Error” will appear on the display if the corona wire on the drum unit needs to be cleaned. … Open the front cover and remove the drum unit and toner cartridge assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.

What happens when printer drum goes bad?

Poor Print Quality

If you’re printer is churning out low-quality documents, it’s likely the case of a damaged printer drum. Unlike blurry prints or black spots, poor print quality is characterized by faded text and images. However, this is another sign that is easily confused with empty ink and toner cartridges.

How do you reset the drum error on a Brother HL 5450dn?

Reset the drum counter for Brother HL-5450/5470/6180 series printer

  1. For the models with LCD: Hold down Go until the Drum Clear message is displayed on LCD, then release Go.
  2. For the models without LCD: Press and hold down Go for about 4 seconds until all the LEDs light up. Once all six LEDs are lit, release Go.

What happens if I don’t replace printer drum?

Many consumers have the “If it ain’t broke, don’t fix it” mentality. But the replacement of a drum unit is vital to laser printers’ health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner.

You might be interested:  What does it mean if your printer is offline

Do I need to replace the drum on my Brother printer?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you check the drum life on a Brother printer?

Can I check the remaining life of my Brother machine’s drum?

  1. Press MENU and choose Machine Info. => Drum Life.
  2. Press the OK key. Your Brother machine’s LCD will display the percentage of remaining drum life.
  3. Press the STOP/EXIT key.

How do you reset the drum life on a Brother printer mfc 7440n?

Brother MFC-7440N Toner and Drum reset. Do not choose anything for drum replacement. When drum replacement menu comes up, press the * and then 00, then press OK. The Brother MFC-7440 uses the DR360 Drum cartridge and the TN330 standard yield or TN360 high yield toner cartridge.

How do I clear the message Drum Error Slide the Green tab?

How to clear error message “Slide the Green tab on Drum Unit”?

  1. Take out the drum unit and toner assembly.
  2. Clean the electrodes with a soft cloth. …
  3. Gently slide the green tab from side to side several times, and return it to the home position at the far left.
  4. Re-install the drum unit.
  5. Repeat above steps for all other color drum unit.

How do I know if my printer drum needs to be replaced?

Separate drum units last quite a bit longer than a toner cartridge and typically should be replaced after the use of 3-4 toners. Your printer should inform you when it’s time to replace the drum, but you can usually tell your drum is on it’s last legs if you start to see black spots or lines across the page.

You might be interested:  How a supreme court ruling on printer cartridges changes what it means to buy almost anything

How often does a printer drum need to be replaced?

10,000 to 50,000

How do you fix a printer drum?

Make sure that the printer is on and open the front cover. Remove the toner cartridge and drum unit from the machine.

Once the new drum is replaced, you will need to reset the drum counter:

  1. Open the front cover.
  2. Press and hold OK for 2 seconds.
  3. Press the Up arrow key or 1 to reset the drum counter.

How do you reset the drum on a Brother printer 2321d?

Drum Stop

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
  4. Close the front cover.
  5. Make sure that the Drum LED is now off.

How do I reset my Brother HL 5470dw printer?

Step 1: Turn on the Brother HL-5470DW. Step 2: Open the front cover of the printer by pressing the front cover release, then pulling the front cover forward. Step 3: Press and hold the green Go button for five seconds, until you see a message on the display that says Drum Clear.

Leave a Reply

Your email address will not be published. Required fields are marked *