Help

How to clear drum error on brother printer

How do you clear a brother drum error?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.

Why does my Brother printer keep saying replace drum?

Without a chip, your drum unit has no way of being able to associate itself with your Brother printer. As a result, you will get the “Replace Drum” message because your printer thinks that you’ve not installed a drum unit. On the right is a standard toner cartridge with a chip.27 мая 2014 г.

How do you reset the drum error on a Brother HL 5450dn?

Reset the drum counter for Brother HL-5450/5470/6180 series printer

  1. For the models with LCD: Hold down Go until the Drum Clear message is displayed on LCD, then release Go.
  2. For the models without LCD: Press and hold down Go for about 4 seconds until all the LEDs light up. Once all six LEDs are lit, release Go.

How do you reset the drum on a brother dr420?

Reset DR420 for Brother HL Printer Models

  1. Turn on the printer and replace the drum. Keep the front door open.
  2. Press and hold the Go button for 4 seconds or until all four LEDs light up.
  3. Release the Go button and close the front door.
  4. If the drum light is off, the drum unit is reset.
You might be interested:  How to fax on brother printer

1 мая 2019 г.

How do you clean a Brother printer drum?

Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.

How do you fix a drum error?

Drum Error (Drum!)

Clean the corona wires in the drum unit. Click here to see how to clean the corona wires. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly.

What happens if you don’t replace printer drum?

Many consumers have the “If it ain’t broke, don’t fix it” mentality. But the replacement of a drum unit is vital to laser printers’ health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner.

How do I know if my printer drum is bad?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

How long does a Brother printer drum last?

approximately 15,000 pages

How do you reset the drum on a Brother printer 2321d?

Drum Stop

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
  4. Close the front cover.
  5. Make sure that the Drum LED is now off.
You might be interested:  Where is the drum on a brother printer

How do I reset my Brother HL 5470dw printer?

Step 1: Turn on the Brother HL-5470DW. Step 2: Open the front cover of the printer by pressing the front cover release, then pulling the front cover forward. Step 3: Press and hold the green Go button for five seconds, until you see a message on the display that says Drum Clear.

How do I reset my brother hl 5450dn printer?

Reset the settings to factory default

  1. Power the machine off.
  2. Press down the GO button and power the machine on.
  3. Keep pressing GO until the all LEDs are on. The Ready LED will be off.
  4. Release GO. All LEDs will be off.
  5. Press GO ten times. Your machine’s printer settings will be reset.

How do you reset the drum counter on a Brother printer DCP 7065dn?

How to reset the drum counter:

  1. Open the front cover of the printer and push “clear” on the printer display.
  2. Confirm you are installing a new drum unit by pressing the up arrow.
  3. “Accepted” should appear on the LCD display, now you are ready to print!

How do I reset my brother DCP 7065dn toner?

How to reset Brother DCP-7065DN Toner Counter

  1. STEP 1 Open the front door (The one to access the toner)
  2. STEP 2 Press the clear key.
  3. STEP 3 Press the start key.
  4. STEP 4 Press the down arrow key.
  5. STEP 5 Press the up arrow key.
  6. STEP 6 Press the OK key.
  7. STEP 7 Close the front door.

Leave a Reply

Your email address will not be published. Required fields are marked *