Help

How to clear a paper jam in a brother printer

What do I do when my printer says paper jam but there is none?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.

Why does my Brother printer keep saying paper jam?

To clear the error message Paper Jam after you removed the jammed paper, please open and close the scanner cover. If you still receive the error message, a small piece of paper may be stuck inside your Brother machine. Please follow the steps below to remove any ripped paper remaining inside your Brother machine.

How do you clear a paper jam status?

Solution one: Clear the paper jam

  1. Step one: Remove any loose paper. Remove any loose sheets of paper from the input tray and the output tray. …
  2. Step two: Clear the paper jam from the rear of the product. …
  3. Step three: Open the cartridge access door, and then clear the jam. …
  4. Step four: Print a printer status report.

Why does it say paper jam when there is no paper jam?

The guides in the paper tray are there to make sure the stack of paper is exactly where the printer was designed to grab from. … So even though there’s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.

You might be interested:  How to change email address on hp printer

How do I reset my HP printer after paper jam?

How do I reset my HP printer after paper jam?

  1. Firstly, Turn ON the printer.
  2. Then disconnect the power cable from the printer.
  3. Unplug the power cable from the outlet.
  4. Wait for 30 seconds.
  5. Now plug the power cable back into the outlet.
  6. Reconnect the power cable to the rear of the printer.
  7. Again, Turn your printer on.
  8. Finally, check if the issue has been resolved.

How do I fix my Brother printer jam?

Please follow the steps below to solve the problem:

  1. Open the front cover and leave the machine for at least 10 minutes to cool down. …
  2. Slowly take out the drum unit and toner cartridge assembly. …
  3. Close the front cover. …
  4. Pull the paper tray completely out of the machine.
  5. Use both hands to slowly pull out the jammed paper.

How do I fix the jam in my Brother printer?

JAM INSIDE

  1. Open the front cover.
  2. Leave the machine turned on for 10 minutes to cool down. …
  3. Slowly take out the drum unit and toner cartridge assembly. …
  4. Push down the green lock lever and take the toner cartridge out of the drum unit. …
  5. Put the toner cartridge back into the drum unit until you hear it lock into place.

How do I reset my Brother printer?

Press the Up arrow key select Reset.

  1. Press the Settings button.
  2. Press All Settings.
  3. Press Initial Setup.
  4. Press Reset.
  5. Press All Settings or Factory Reset (depends on which model you have).
  6. Press Yes.
  7. Press Yes again and hold for two seconds.
You might be interested:  Who created the printer

What causes paper jam in printers?

So here are the most common causes: Paper inserted incorrectly. … Sheets stuck together, folded or frayed paper, and an overloaded tray can all create problems. Even using the wrong type of paper can cause paper jams.22 мая 2018 г.

Leave a Reply

Your email address will not be published. Required fields are marked *