FAQ

What do i do when my printer says paper jam but there is none?

How do you fix a false paper jam?

Solution 1: Remove Jammed Paper From The Input Tray

  1. Turn on the printer by pressing the power button.
  2. From the rear side of the printer eject the power cord. …
  3. Locate the input tray on the backside of the printer.
  4. Gently pull out the jammed paper from the input tray to fix the issue.

What do I do when my Epson printer says paper jam but there is none?

If the error message still does not clear, try the following steps. Turn off the printer and unplug the power cord from the printer and the electrical outlet. Unplug all other cables from the printer. Pull out the paper cassette, and carefully stand the printer on its right side.

How do I reset my HP printer after paper jam?

How do I reset my HP printer after paper jam?

  1. Firstly, Turn ON the printer.
  2. Then disconnect the power cable from the printer.
  3. Unplug the power cable from the outlet.
  4. Wait for 30 seconds.
  5. Now plug the power cable back into the outlet.
  6. Reconnect the power cable to the rear of the printer.
  7. Again, Turn your printer on.
  8. Finally, check if the issue has been resolved.

How do you clear a paper jam status?

Solution one: Clear the paper jam

  1. Step one: Remove any loose paper. Remove any loose sheets of paper from the input tray and the output tray. …
  2. Step two: Clear the paper jam from the rear of the product. …
  3. Step three: Open the cartridge access door, and then clear the jam. …
  4. Step four: Print a printer status report.
You might be interested:  How to connect a canon printer

Why do I keep getting paper jams?

So here are the most common causes: Paper inserted incorrectly. … Sheets stuck together, folded or frayed paper, and an overloaded tray can all create problems. Even using the wrong type of paper can cause paper jams.22 мая 2018 г.

How do you reset your Epson printer?

To Factory Reset an Epson printer:

  1. Turn off the printer.
  2. Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).
  3. Turn on the printer while holding the reset button.
  4. Wait until a message prints indicating that the printer is resetting.

Why does my HP printer keep saying paper jam?

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.

How do you reset your printer?

To do this, power down the printer and then unplug the power cord from the wall. Wait for a minute, then plug the printer back in and power it back up. Wait for the cartridges to center, and then try printing again. If your issue persists, you can also try resetting the printer to the default or factory settings.

How do I continue to print after paper jam?

If you have problems with paper jams, try these solutions:

  1. Cancel the print job from your computer, if necessary.
  2. Gently pull out any jammed paper from the output tray and sheet feeder.
  3. Press the B&W copy button or the color copy button to resume printing. …
  4. Press the power button to turn the product off.
You might be interested:  How to connect printer to computer wirelessly

How do I remove paper from my Epson printer?

Paper Jam Problems

  1. Cancel the print job from your computer, if necessary.
  2. Gently pull out any jammed paper from the rear paper feed slot.
  3. Open the front cover.
  4. Gently remove any jammed paper. Caution: …
  5. Close the front cover.
  6. Carefully follow all paper loading instructions when you load new paper.

Leave a Reply

Your email address will not be published. Required fields are marked *