How do you reset the drum on a Brother printer?
FAQs & Troubleshooting
- Close the front cover.
- Make sure the machine is turned on.
- Press. (Settings). …
- Press All Settings. (This step might be skipped in some models.)
- Choose Machine Info. or Machine Information => Parts Life.
- Press and hold Drum or Drum Life until the machine’s display message changes.
- Press Yes.
What do I do when my Brother printer says Drum replacement?
If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.
- Make sure that the machine is turned on.
- Open the front cover.
- Press and hold OK for 2 seconds.
- Press the Up arrow key or 1 to reset the drum counter.
- Close the front cover.
Why does my Brother printer keep saying replace drum?
The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
How do you replace the drum on a Brother MFC l8850cdw?
Replacing the drum unit
Press the front cover release button and then open the front cover. Hold the blue handle of the drum unit. Pull the drum unit out until it stops. Turn the blue lock lever (1) at the left of the machine counterclockwise to the release position.
What happens if I don’t replace printer drum?
The drum then picks up toner in the areas where it is charged and transfers it to the paper. An electrical charge in the printer then resets the drum’s charge so that it can print again. Over time, the drum’s chemicals can lose their effectiveness and the drum’s surface can be damaged.
How do I clean the drum on my Brother printer?
Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
How long does a Brother printer drum last?
approximately 15,000 pages
What are the signs that a printer drum needs to be replaced?
The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.
How do I know if my printer drum needs replacing?
The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.
Is a printer drum the same as toner?
The two most important components of a laser printer are the toner cartridge and the drum unit which is where the question of drum units vs. toner cartridges comes in. … So, the toner cartridge is the container that holds toner particles while the drum unit is the component that holds the image that needs to be printed.
What is the drum on a printer?
The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.
How do you reset the drum on a Brother MFC 9330cdw?
Brother MFC-9330CDW – Reset Drum
- Press “X” to clear the error message.
- Press the tools button (picture of a spanner).
- Press “All Settings”.
- Press “Machine Info”.
- Press “Parts Life”.
- Press “#” until the touch screen message changes.
- Press the colour of the drum that was replaced.
- Press “Yes”. Archive.