FAQ

How to get hp printer to accept refilled cartridge

Why is my HP printer not accept refilled cartridge?

HP makes it difficult for you to use refilled ink or 3rd party cartridges. This error message is displayed when: 1) You installed a cartridge that has been refilled or made by non-HP manufacture. 2) When your cartridge printed too many pages (>300 for color and >800 for black).

How do you trick HP ink cartridges?

If the contacts are at the top of the ink cartridge, turn it around so the contacts are closest to you. Place a small piece of clear tape over the seventh copper contact in the second row of contacts from the left side. Place the cartridge back in the printer. Tell the printer to run an alignment.

How do I get my Canon printer to recognize my refilled cartridge?

If the printer still does not recognize the cartridge, try taking out the unrecognized cartridge, turn off the power on the printer and unplug the printer for about 30 to 60 seconds. Plug and power the printer back on and reinstall the cartridge and print.

What do you do if your printer doesn’t recognize the ink cartridge?

Steps to Take to get your Printer to Recognize Cartridges

The first thing you can do is reset your printer’s memory. Remove the new cartridge and put the old one back in and leave them there for a while. Then make the switch again to see if your printer now recognizes the ink cartridges.

How do I override my HP ink cartridge?

How to Override Empty HP Ink Cartridges

  1. Turn off the HP printer by pressing and holding the “power” button.
  2. Turn the HP printer back on by pressing the power button and allowing it to run through its setup procedure.
  3. Install the refilled ink cartridge by opening the access door on the HP printer.
You might be interested:  How do i connect my epson printer to my wireless network?

How do I reset my HP ink cartridge?

To bypass your toner or ink chip you can do any of four things.

  1. Use an auto-reset ink tanks if your printer models have them.
  2. Fit your printer with a new chip or ink tank.
  3. Use your printer model’s chip resetter to restore the “empty” chip to full.
  4. Disable your ink or toner monitor.

How do I reset my HP ink cartridge toner?

How to Reset HP Toner Cartridge Chips

  1. Switch the printer off.
  2. Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. …
  3. Push the toner rotate button while you continue pressing the green button. …
  4. Repeatedly push the red button (cancel button). …
  5. Press the green button.

How do I turn off HP non genuine cartridge installed warning?

If your Hewlett-Packard printer does not have any internet features you can simply go into your printer settings which can be located on your printer menu and you will see the option to disable the HP cartridge protection. Just select the disable option and click Apply and Save if necessary.

How do I disable HP protected ink cartridge?

A. Easiest method to DISABLE ‘Cartridge Protection’ feature (or if your printer is not connected to the internet)

  1. On the printer’s control panel display select Setup.
  2. From the Setup menu select Tools.
  3. From Tools menu scroll down to select Restore Factory Defaults.

How do I bypass the ink levels on my Canon printer?

To disable the ink level detection, please press and hold down the STOP/RESET or RESUME/CANCEL button on the printer for at least 7 seconds, then release it. You will need to do this procedure for each ink cartridge that is low or out of ink.

You might be interested:  How do i setup a printer on my ipad

Where is the reset button on a Canon printer?

Turn on your printer and go to the menu. Access the directional arrows to perform in the setup menu. Go to the Device settings and then press OK. Choose the Reset settings option and then press OK to start the process.

Leave a Reply

Your email address will not be published. Required fields are marked *