FAQ

How to fix a paper jam on a canon printer

Why does my Canon printer keep saying paper jam?

Any time your printer halts because of a paper jam, check the tray that holds the paper. … Once you’ve done that, check to make sure that no paper is actually stuck up inside the printer itself, especially in the rollers near the tray, and try it again.

How do you fix a paper jam error on a Canon printer?

Written Steps

  1. Press Stop to cancel the print job.
  2. Turn off the machine and unplug the power cord.
  3. Open the paper output cover.
  4. Remove any paper from the front tray. …
  5. Make sure the jammed paper isn’t under the ink holder. …
  6. Hold the jammed paper with both hands and pull it out slowly to avoid tearing.

How do you fix a paper jam in Pantum printer?

Step3: Paper jam inside the printer. Remove the laser toner cartridge along the guides, slowly pull the jammed paper out along the paper output orientation, and then insert the laser toner cartridge into the printer.

Why does my printer keep saying paper jam?

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.

Where is the reset button on a Canon printer?

Turn on your printer and go to the menu. Access the directional arrows to perform in the setup menu. Go to the Device settings and then press OK. Choose the Reset settings option and then press OK to start the process.

You might be interested:  How do i connect my ipad to my printer

How do I reset my Pixma printer?

Press and Hold the “Reset button” on the printer. While pressing the “Reset button“, press and hold the “Color Start” button. Wait for 5 seconds. Release the “Color Start” button, and then release the “Reset Button“.

How do you remove paper from a printer?

Clear jammed paper from the rear access door

  1. Turn the knob on the rear access door counter-clockwise.
  2. Remove the door.
  3. Pull the jammed paper out of the printer.
  4. Check to make sure no scraps of paper are stuck in the printer.
  5. Put the rear access door back into the printer.
  6. Turn the knob on the door clockwise.

How do you reset your printer?

To do this, power down the printer and then unplug the power cord from the wall. Wait for a minute, then plug the printer back in and power it back up. Wait for the cartridges to center, and then try printing again. If your issue persists, you can also try resetting the printer to the default or factory settings.

How do you fix a printer?

How to Fix Everything For Dummies

  1. Look for a loose connection or damaged cable. …
  2. Check inside the printer for a paper jam.
  3. If you see paper under the platen or roller, unplug the printer.
  4. Pull the paper toward you. …
  5. Look at the configurations in the printer software and the drivers.

How do I clear the jam on my HP printer?

Clear jammed paper from the rear access door

  1. Turn the knob on the rear access door counter-clockwise.
  2. Remove the door.
  3. Pull the jammed paper out of the printer.
  4. Check to make sure no scraps of paper are stuck in the printer.
  5. Put the rear access door back into the printer.
  6. Turn the knob on the door clockwise.
You might be interested:  How to print from my phone to my printer

How do you fix a jammed Brother printer?

Please follow the steps below to solve the problem:

  1. Open the front cover and leave the machine for at least 10 minutes to cool down. …
  2. Slowly take out the drum unit and toner cartridge assembly. …
  3. Close the front cover. …
  4. Pull the paper tray completely out of the machine.
  5. Use both hands to slowly pull out the jammed paper.

Leave a Reply

Your email address will not be published. Required fields are marked *