FAQ

How to change toner cartridge in brother printer

How do I get more toner out of my brother cartridge?

Here are some tips on how to get more toner out of your (nearly) empty Brother toner cartridge and squeeze out a few extra prints: 1. Remove the combined toner and drum cartridge from your Brother printer. Separate the toner cartridge from the drum cartridge and give the toner cartridge a little shake.

How do I bypass toner low on Brother printer?

To enable or disable Continue Mode, follow the steps below:

  1. Press the Up or Down arrow key to choose General Setup, and then press OK.
  2. Press the Up or Down arrow key to choose Replace Toner, and then press OK.
  3. Press the Up or Down arrow key to choose Continue or Stop. Press Go.

Does shaking the toner cartridge help?

You never want to shake the toner bottle. Although shaking the toner bottle isn’t any less safe to your health than shaking a home or small office toner cartridge, if your printer runs out of toner because you tried extending the life of your bottle, your developer could break.

Why does my Brother printer keep saying replace toner?

If you install a new genuine Brother toner cartridge but the “Toner Low”, “Replace Toner” or “Toner Ended” error indication remains, the toner cartridge may not be installed correctly. … Confirm that you have installed both a toner cartridge and a drum unit in the machine.

Where is the toner cartridge on a Brother printer?

FAQs & Troubleshooting

  1. Make sure the machine is turned on.
  2. Open the front cover.
  3. Remove the toner cartridge and drum unit assembly from the machine.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new toner cartridge.
  6. Remove the protective cover.
You might be interested:  How to find an ip address on a printer

How do I change my printer toner?

To replace the toner cartridge, open the scanner assembly and top cover, remove the old toner cartridge, and then install a new one.

  1. Lift the scanner assembly. …
  2. Open the top cover. …
  3. Remove the toner cartridge. …
  4. Remove the new toner cartridge from the package. …
  5. Place the used toner cartridge in the bag for recycling.

How do I reset my brother lc103 cartridge?

Method 1:

  1. Turn the Brother printer off and then wait for a few minutes. …
  2. Open your printer’s cover by either lifting it or lifting a lever on the side. …
  3. Press the “Cancel” and “Print” buttons at the same time on the printer and then press the “+” button. …
  4. Press the “OK” or “Enter” key to complete the reset option.

Why won’t my Brother printer recognize the ink cartridge?

The message “Cannot Detect” will appear on the display of the Brother machine after installing an ink cartridge(s) that is (1) installed too quickly or (2) broken or damaged or (3) a non-Brother cartridge. … Install the cartridges slowly, in the direction of the arrow on the label until it clicks into place.

Can you print if one cartridge is empty?

You may be able to print when one printer cartridge is empty by adjusting your printer settings, but it depends on the leniency of your printer. … Unfortunately, many new printers are designed to block you from printing if a cartridge is out of ink, forcing you to buy more ink at the least convenient time.

You might be interested:  How to calibrate printer to match monitor

How do you reset the toner low on a Brother printer?

  1. Power on the Brother printer.
  2. Open the toner access door located at the front of the printer.
  3. Press the “Clear/Back” button.
  4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
  5. Press the “1” button to reset the toner cartridge display.

Can you print with low toner?

When “Toner Low” is displayed, prepare a new toner cartridge. If you do not have a new toner cartridge at hand and need printing before obtaining it, you can continue printing about 20 pages(*1) by opening and closing the front cover or the output tray. … The printing will stop after about 100 pages are printed.

Leave a Reply

Your email address will not be published. Required fields are marked *